2022年5月28日   
首 页关于我们产品介绍行业应用润滑百科常见问题人才招聘联系方式
选择分类:
输入条件:
- 产品类别分类 -

 产品名称:C-7127
产品说明:

C-7127 Bulk Clearer For Bird Strikes
C-7127 散装 雀鸟撞击专用清洁剂

DESCRIPTION

When used as directed, Calla 7127 is formulated to disinfect hard, non-porous, inanimate, environmental surfaces: floors, walls, metal surfaces, stainless steel surfaces, glazed porcelain, glazed ceramic tile, plastic surfaces, bathrooms, shower stalls, bathtubs, cabinets, tables, chairs, countertops, appliances and telephones.

PACKAGING

Available in gallons, 5 gallon pails, 55 gallon drums, 32 oz spray bottles with pre-metered disinfectant concentrate

产品包装: Bulk
资料下载: 产品资料下载
 产品名称:C-804
产品说明:

C-804 Bulk Cleaning and Degreasing Compound
C-804 散装 清洁与油脂清除化合物

DESCRIPTION

Calla 804 is a water dilutable cleaner designed for light to heavy duty cleaning of aerospace equipment including aircraft, ground equipment and AGE engines. Calla 804 provides heavy duty cleaning capability with low toxicity and great biodegradability where environmental concerns are an issue. It is specifically formulated to remove heavy deposits of grease, oil, hydraulic fluid, and carbon deposits.

SPECIFICATIONS

  • Mil-PRF-87937 Ty IV
产品包装: Bulk
资料下载: 产品资料下载
 产品名称:C-800
产品说明:

C-800 Bulk Cleaning and Degreasing Compound
C-800 散装 清洁与油脂清除化合物

DESCRIPTION

Meets all requirements of Specifications Mil-C-87937C Type II (USAF) and is on the Qualified Product List for this specification. Qualification Reference is SFIT-95-001.

Calla 800 is highly concentrated and versatile water base cleaner and is an outstanding general aircraft cleaner and exhaust stain remover. It is also excellent for cleaning wheel wells and landing gear without solvent.

APPLICATION

The following recommendations for the cleaning of aircraft, aircraft components and facilities have been compiled through many years of cleaning many types of aircraft under widely varied conditions.

Exterior Fuselage
Tail sections, Wing Tips, Etc.: Mix 1 part Calla 800 with 3 to 20 parts water, depending on the amount of soil; apply by spray or mop; allow a few minutes for penetration before mopping or brushing and rinsing thoroughly. For recovery of badly oxidized surfaces, be 1 to 3 mixture will give excellent results under most conditions. Future washing with more dilute mixtures will maintain oxide free, shiny surfaces.

Exterior-Blast Area
Landing Gear: Mix 1 part Calla 800 with 2 parts water, apply by spray/mop; allow a few minutes for penetration before scrubbing heavy deposits; flood rinse with water.

If solvent can be used, mix 1 part Calla 800 with 5 parts solvent. Agitate mixture briefly with air to form emulsion. Spray or mop rnifiure over entire area; allow a few minutes for penetration; scrub surfaces well; rinse with water.

Landing Gear & Wheel Wells
While the use of solvent is restricted, apply Calla 800 full strength and allow 20 to 30 minutes dwell time, brush those areas subject to heavy grease build up. Rinse with high pressure hot water with the nozzle as cclse as possible to surface to take advantage of the additional agitation of water pressure.

Waterless Cleaning
Dilute Calla 800 as amount of soil requires in open bucket or barrel. Saturate mop in solution and wring out excess. Mop the surface thoroughly covering a small area at a time. Rinse with a clean, damp mop.

PACKAGING

Quarts, gallons, 5 gallons, drums. Special packaging upon request

产品包装: Quarts, gallons, 5 gallons, drums. Special packaging upon request
资料下载: 产品资料下载
 产品名称:C-301A
产品说明: C-301A Bulk Degreaser Large Surfaces
C-301A 散装 大面积油脂清除剂

DESCRIPTION

Calla 301-A is a uniquely formulated all purpose, heavy duty cleaner and degreasing compound that efficiently removes grease, oils, carbon, hydraulic fluid and dirt, as well as many soils which resist other cleaner. It is nonflammable, biodegradable, has no irritating vapors and contains no harmful concentrations of phenols, chromates or chlorinated solvents. Calla 301-A is noncorrosive and will not pit, stain or attack aluminum alloys, magnesium, copper, steel or other metals. It will not injure acrylic paint or other paints used on equipment, machines or autos when used as directed. It will not damage wiring on motors or acrylic base plastics. Calla 301-A rinses easily and leaves no residue or stain, even if allowed to completely dry on the surface.

APPLICATION

The following recommendations for the cleaning of aircraft, aircraft components and facilities have been compiled through many years of cleaning many types of aircraft under widely varied conditions.

FUSELAGE TAIL SECTIONS, WING TIPS, ETC.
Mix 1 part Calla 301-A with 3 to 20 parts water, depending on the amount of soil; apply by spray or mop; allow a few minutes for penetration before mopping or brushing and rinsing thoroughly. For recovery of badly oxidized surfaces, the 1 to 3 mixture will give excellent results under most conditions. Future washings with more dilute mixtures will maintain oxide free, shiny surfaces.

BLAST AREAS, LANDING GEAR
Mix 1 part Calla 301-A with parts water; apply by spray or mop; allow a few minutes for penetration before scrubbing heavy deposits; flood rinse with water. If solvent can be used, mix 1 part Calla 301-A with 5 parts solvent. Agitate mixture briefly with air to form emulsion. Spray or mop mixture over entire area; allow a few minutes for penetration; scrub surfaces well; rinse with water

VINYL PLASTICS OR FABRICS, RUGS, TOILETS
Mix 1 part Calla 301-A with 4 to 8 parts water for general use: allow time to use full strength. Apply with spray, brush or cloth; allow time to penetrate; agitate with rush or cloth; wipe off with clean damp cloth. On rugs or carpeting, remove residue with vacuum unit.

WATERLESS CLEANING
Dilute Calla 301-A, as amount of soil requires, in open bucket or barrel. Saturate mop in solution and wring out excess. Mop the surface thoroughly covering a small area at a time. Rinse with a clean damp mop.

FOOD SERVICE EQUIPMENT, GALLEY AREA:
On ovens, apply Calla 301-A full strength, or diluted 1 to 1 with water; spray or sponge area to be cleaned; allow 10 minutes for penetration. Remove baked on grease with scouring pad; rinse with warm water. Wipe thoroughly. Dilute to suit on other equipment and galley surfaces.

RAMPS, HANGAR HOUSEKEEPING
Use Calla 301-A 1 part to 5 parts water in scrubbers.

GROUND POWER EQUIPMENT
Mix 1 part Calla 301-A with 3 to 5 parts water; spray or brush on; allow 3 to 5 minutes for penetration; agitate if necessary; rinse off with water.

AIRCRAFT WHEELS, BRAKES AND COMPONENTS
Heated Dip Tank: dilute the Calla 301-A with 1 to 4 parts water, depending on the operating temperature of the tank. At 120 degrees Fahrenheit (50 degrees Celsius) 1 Calla 301-A to 4 water; at 100 degrees Fahrenheit (40 degrees Celsius) 1 to 1. For wheels, soak for 30 minutes or more; scrub heavy deposits with wheel brush; rinse with warm to hot water.

COLD DIP TANKDilute Calla 301-A 1 to 1 with water of 1 to 4 with solvent; agitate solution; proceed as in heated dip tank.

SPRAY ON METHOD
Use Calla 301-A straight or mix with 3 parts solvent; agitate; apply; allow 10 to 15 minutes for penetration; scrub; and rinse with pressure water. Repeat immediately, if necessary.

OIL OR HYDRAULIC FILTER SCREENS
Use full strength. Allow 30 minutes of penetration; agitate with air if possible and rinse with water. In Ultrasonic Tank: Use diluted 1 part to 3 parts water for best results.

STEAM CLEANING
Dilute 1 part Calla 301-A with 20 parts ware in solution tank. Increase concentration if required by extreme soil condition. Reduces scaling in machine coils. Provide spray wetting and penetrating action. Rinses freely.

FEATURES

Refer to the current Material Safety Data Sheet on this product for information regarding safety precautions relative to physical and health hazards. In case of emergency, call Zip-Chem Products Office: 800-648-2661.

SPECIFICATIONS

  • CSD-1
  • AMS 1526-A
  • AMS 1550-A
  • BAC 5744

PACKAGING

Aerosol, quarts, gallons, 5 gallons, drums. Special packaging upon request

产品包装: Aerosol, quarts, gallons, 5 gallons, drums. Special packaging upon request
资料下载: 产品资料下载
 产品名称:C-120/CallaSolve120
产品说明:

C-120 Bulk/CallaSolve120 Bulk Heavy Duty Equipment Cleaning
C-120散装/CallaSolve120散装 重型设备清洁剂

DESCRIPTION

CallaSolve 120 is a water dilutable D-limonene based solvent emulsion cleaner designed for heavy duty cleaning of aerospace equipment including aircraff, ground equipment and AGE engines. CallaSolve 120 is listed as a qualified product in Mil-C-87937 C Ty I (USAF) and is authorized for use by General Aircraft per T.O. 1-1-691 and T.O. 1 C-135 (K) A-3-4 for aircrafi cleaning. The QPL reference is SFTT95-002.

CitraSafem is a product from Inland Technologies.

FEATURES

CallaSolve 120 is infinitelywaterdilutable while maintaining a stableemulsion. The formula contains hi-purity D-limonene, emulsifiers, stabilizers, surfactants and a selection of corrosion inhibiting additives designed specifically for aircraft substrates.

SPECIFICATIONS

The qualiffcation to Mil-C-87937C Type I and listed tech orders allows CallaSolve 120 to be used for full aircraft wash, and for interior spot cleaning in areas that can be completely dried by handwiping or forced air drying. It is not authorized for final surface preparation cleaning prior to paint or sealant application. Our product D-5600 containing CitraSafeTMis authorized for use in integral fuel tank sealing repair applications.

  • MIL-PRF-87937D Ty I
  • T.0.-1-691
  • T.0.-1-691
  • DPM 5278-1

PACKAGING

Aerosol, quarts, gallons, 5 gallons, drums. Special packaging upon request

产品包装: Aerosol, quarts, gallons, 5 gallons, drums. Special packaging upon request
资料下载: 产品资料下载
 
 
20条信息  每页5条  当前为4/4页 | 上页| 尾页| 转到第
地址:香港黃竹坑道40號貴寶工業大廈17樓B室     電話:(852)2866 3321 傳真:(852)2520 2563
電郵:mailhkg@realder.com 網址:http://www.realder.com  
Copyright ©2016 Realder (Hong Kong) Co.,Ltd. All Rights Reserved